Vertical shaft hammer crusher spare parts/dolomite compound
crusher/stone coal compound crusher
The compound crusher, also called composite fine crusher, is a kind
of fine crushing equipment with large crushing ratio. There is no
screening grate in the discharging mouth.The crushed material can
be adjusted arbitrarily, and is not affected by the wear of the
plate hammer and the lining plate.
The advantage of Without the screen grate is that it is not easy to
block when the material has high moisture and mud rate; the elastic
adjustment mechanism can be used to automatically discharge the
unbreakable material. It will not cause equipment damage; the
bearing is horizontally arranged and has a long service life, which
can crush materials with high temperature (such as cement clinker).
Working principle
Materials fall into the high-speed rotation impeller from the above
of machine, under the action of high-speed centrifugal force, have
high-speed impact with another umbrella form materials which flow
around the impeller, after they attack each other, then discharged
from the bottom, it forms close-circuit and with many times
circulation, it can achieve the required product size by screening
equipment controlling.
Product Advantages
1.It features simple structure and easy operation. adopting the
principle of stone strike stone , smaller wear.
2.High crushing rate, less energy consumption.
3.It is good at crushing material with high moisture content,
humidity can reach 8%.
4.Suitable for breaking medium hard, especially like clay,
limestone and gypsum
Specifications
| Model | PFL-800 | PFL-1000 | PFL-1250 | PFL-1500 | PFL-1750 |
| Feed Grain(mm) | 100 | 120 | 150 | 180 | 200 |
| Material-in Size (mm) | 0-5 | 0-5 | 0-5 | 0-5 | 0-5 |
| Trening Capacity(t/h) | 10-20 | 20-40 | 40-70 | 70-100 | 130-190 |
| Motor Power (kw) | 22 | 45-55 | 75 | 90-110 | 132-160 |
| Maine Shaft Speed(r/min) | 934 | 769 | 530 | 495 | 424 |
| Overall Dimension(mm) | 2100*1200*1700 | 2600*1400*1900 | 2800*1600*2100 | 3100*1900*2200 | 3710*2360*2390 |
| Weight(t) | 2.3 | 4.5 | 6.2 | 8.3 | 12 |
Compound crusher spare parts
The major wearing parts of the compound crusher is impact plates
and hammers. The impact plates are made of high manganese alloy
Mn13Cr2, and hammers are made of extremely wearable materials
Cr26NiMo.
Customer working site
